BAOSHISHAN Digital Liquid Density Meter Alcohol Ammonia Oil Density Tester Baume Meter Hydrometer with RS-232C Interface Weighing Accuracy 0.001g/120g Density Range 0.0001-99.9999g/cm³ (XF-120YT)

BAOSHISHAN Specifications Model:XF-120YT Weighing range: 0.001g-120g Density accuracy: 0.0001g/cm³ Density range: 0.0001-99.9999/cm³ Time: about 5 seconds Display: Density and volumeOutput mode: RS-232C standard communication interface, can be connected to the printer and computer, convenient test data and print outputViscous liquids require purchasing stainless steel liquid assemblies Note All products have been checked and packaged in good condition before shipping. After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.

• [Parameter]--Weighing accuracy/range: 0.001g/120g; Density analysis: 0.0001 g/cm³; Measurement range: 0.0001-99.9999g/cm³
• [Features]--1.Operation in one step; 2.can be used to measure the density of samples at any temperature ranging from room temperature to 100; 3.only 50CC is needed for the sample; 3.density limit set, temperature compensation; 4.100g automatic correction, distilled water inspection results; 5.RS-232C standard interface, convenient to output and print the test data
• [Advantages]--The liquid density meter combines Archimedean principle with modern electronic technology. It can display density directly and digitally. It has high measurement accuracy, stability and durability. Simpler than traditional Westphal balance method and specific gravity bottle method, and it is not affected by external factors and temperature, so it can realize fast and accurate measurement.
• [Difference]--The difference between the two XF-120YTs is that one is suitable for ordinary solutions with glass weights and the other is for acidic solutions with teflon weights
• [Operation Step]--1.Put the hook on the measuring table and press ZERO to zero; 2.Hang the standard weight on the hook and weigh it. Press ENTER key to store it after stabilization; 3.Put the weight connected with the hook into the liquid to be tested, and store it in ENTER key after stabilization, showing the density value.