Spark Plug sparkplug Tester Coil Ignition car Protector Tools Vehicle with Double Test Holes 12mm Spark Plug Socket

spark plug sparkplug tester coil ignition car protector tools vehicle with double test holes 12mm spark plug socket Car Spark Plug Tester User Manual:Place the Spark Plug into tester hole 1 or 2; If you want to compare the new spark plug and old one, place new spark plug into hole 1 and the old on into hole 2Close up the protective cover , then plug in the adaptor to the side socket , connect the tester to power supply.Turn the key switch clockwise to turn on tester, indicator will light up green.Continue to turn the switch clockwise, you can adjust the working frequency between 500rpm to 6000rpm/min, The higher the frequency is set, the stronger the spark more. Specification: Application Range: 12V gasoline vehicles car spark plugs Power Adapter: Input 100-240V AC / Output 12V 1A DC Simulated Engine Speed Range Control: 500-6000 Spark Plug Inner Hole Diameter: 12mm application: suitable for 12V driven gasoline vehicles spark plugs Host size: 145*90*114mm Host weight: 354 (without spark plug power supply) External power supply length: 1m Power adapter: input 100~240V AC Output 12V 1A DC Package list: Spark Plug Tester *1 Power Adapter * 1 How To Work 1.Place the spark plug in the test hole 2.Cover the protective cover 3.Connect the power supply & adjust the working frequency 4.Observe the spark plug test status through the protective coverKindly Note 1.Please turn off power before placing spark plug. 2. The spark plug tester is a high-voltage detector, so do not touch spark plug with hands at work to avoid danger.

• spark plug tester Using engine simulation, the automotive spark tester efficiently evaluates spark plug performance and is suitable for most 12V gasoline vehicle models, ignition coil tester supporting input voltages from 100V to 240V. The ignition coil tester tool spark tester is almost suitable for all 12V and 24V gasoline engine spark plugs. vehicle plug tester is compatible with 99% of crankshaft engines and motorcycle plugs, and sparkplug tester can even be adjusted according to different plug heights. No more speculation,spark tester tool only reliable performance!
• The automotive spark plug tester and coil tester are mainly used to determine the performance and ignition strength of spark plugs by comparing the spark intensity of two spark plugs, in order to identify damaged spark plugs. The spark tester automotive has two spark plug sockets. Our spark plugs tester dual hole testing function for spark plugs allows you to simultaneously place both new and old spark plugs into the testing holes, spark plug tool kit wire tool making your judgment more accurate through testing and comparison
• Our spark plug tool is made of high-quality ABS material, which spark plug tester with two12mm spark plug socket spark tester has good impact resistance and heat resistance. The car ignition coil tester is equipped with a high-voltage indicator light and a transparent protective cover, spark plug tester with two12mm spark plug can observe the status of the spark plug through the protective cover, ensuring safety during use. spark plug tester with dual testing hole Attention: Be sure to cover the protective cover before use to avoid injury
• spark plug tester with double test holes Plug and play convenience,Simplicity is key! Just insert the spark plug into the spark tester and plug it in. By adjusting the RPM setting from 0 to 6000rpm, you can easily adjust the frequency by quickly turning the knob. spark plug tester tool Higher settings mean stronger sparks, spark plug tester automotive simulating real engine conditions to obtain accurate readings - it's that simple!
• spark checker Not suitable for lawn mowers, chainsaws, or most small engine plugs. For optimal results, please use in low light conditions to avoid any glare. Our spark plug tester cannot guarantee compatibility with spark plugs other than automotive spark plugs, such as chainsaw spark plugs, lawn mower spark plugs, etc. I suggest you purchase a spark plug testing machine and give it a try. If the spark plug can be inserted into the test hole, it means it is compatible.